Model:
ZKLDF100
Price Range:
negotiable
Structure:
axial/radial bearing
Type:
ZKLDF100
Inside Diameter:
100mm
Outside Diameter:
185mm
Thickness:
38mm
Brand Name:
BYC
Material:
Gcr15SiMn bearing steel
Precision Rating:
P2/P4
Seals Type:
sealing shields on both side
we are a professional factory to produce YRT rotary table bearings, we have YRT series ,YRTS series ,YRTM series ,ZKLDF series.
we have stock for all ZKLDF series , the bearing types are:ZKLDF100,ZKLDF120,ZKLDF150,ZKLDF200 , ZKLDF260,ZKLDF325.ZKLDF395,ZKLDF460.
ZKLDF100 parameter list as below:
| d | 100 mm | | Sizes d > 460 mm available by agreement |
| | D | 185 mm | | | H | 38 mm | |
|
|
| 16 | | Number of fixing holes in inner ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes. |
| | 2 | | Number of retaining screws |
| | 15 | | Number of fixing holes in outer ring
Attention!
For fixing holes in the adjacent construction.
Note the pitch of the bearing holes. |
| | 3 | | Number of extraction threads |
| | 1) | | | | 2) | | | Screw counterbores in the L-section ring open to the bearing bore, see Figure 2.)
Bearing inside diameter unsupported in area x. |
| | 3) | | | Contact surface / centring diameter |
| | a | 5,4 mm | | Fixing holes in inner ring |
| | D1 | 161 mm | | | D2 | 136 mm | | | D3 | 158 mm | | | d1 | 5,6 mm | | Fixing holes in inner ring |
| | d2 | 10 mm | | Fixing holes in inner ring |
| | d3 | 5,6 mm | | Fixing holes in outer ring |
| | G | M5 | | | H1 | 25 mm | | | J | 112 mm | | Fixing holes in inner ring |
| | J1 | 170 mm | | Fixing holes in outer ring |
| | t | 18 X 20 ° | | Quantity of pitches X angle of pitches
Including retaining screws and extraction threads |
|
|
|
| m | 3,8 kg | | | MA | 8,5 Nm | | Screw tightening torque
Tightening torque for screws to DIN 912, grade 10.9. |
| | Ca | 71000 N | | Basic dynamic load rating, axial |
| | C0a | 265000 N | | Basic static load rating, axial |
| | nG | 2800 1/min | | Limiting speed, valid for matched adjacent construction |
| | MRL | 1,6 Nm | | Bearing frictional torque |
| | caL | 1200 N/µm | | Axial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| | crL | 350 N/µm | | Radial rigidity of bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| | ckL | 3600 Nm/mrad | | Tilting rigidity of the bearing position
Rigidity values taking account of the rolling element set, rigidity of the bearing rings and the screw connections. |
| | caL | 2200 N/µm | | Axial rigidity of rolling element set |
| | crL | 350 N/µm | | Radial rigidity of rolling element set |
| | ckL | 5000 Nm/mrad | | Tilting rigidity of rolling element set |
|
|
